Tri Clamp SS316L Diaphragm Valve
- Valve Type: Diaphragm
- For Use With: Food, Beverage
- Seal Material: EPDM Rubber, PTFE Plastic
- Specifications Met: CE, ISO 2852
To maintain sanitary standards in food, beverage, and dairy systems that require frequent cleaning, these valves are compliant for direct food contact. 20 Ra finish, they have smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have a 316L stainless steel body for excellent corrosion resistance. They have metal-to-metal seats that resist temperature fluctuations.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Specification:
Sizes available from 3/4" to 2" (3/4", 1", 1 1/2", 2"")
DN20-DN80 (DN20, DN25, DN40, DN50)
Connection ends: Welded or clamped
Valve body: AISI 316L.
Valve seat: EPDM+PTFE or Silicon
Max. working pressure: 145psi (10bar)
Applications:
Diaphragm valves, manually or pneumatically operated, are specifically designed for use on hygiene and aseptic processes in the pharmaceutical industries.
The valve is excellent for flow control as well as open/close control.
The diaphragm valves are better in feature of flow in comparison with other valves. It is eaiser to clean up and better to process the substance with particles. The phenomenon of air pocket is rare during application of flow control.
Casting body is made by the mould paraffin wax model, paraffin wax model infiltratiion in ceramic, to let the whole body wax mold surface form a layer of strong ceramic. Melt wax modl, then into the melting of the stainless steel solution, after cooling knock off the appearance of ceramic, blank body is made up. Casting size is very accurate, the outward apperance is smmoth, clean and tidy.
Various configuration of Diaphragm valve
Pneumatic Operation
1. Didaphragm valve with Positioner/Process Controller(IL-TOP)
2. Diaphragm valve with Control Unit(C-Top)
3. Valve position Regulator
4. Position Sensor Module
5. Stainless steel actuator
6. Plastic Actuator Electric Operation
Manual Operation
8. Plastic Handle
9. Stainless steel handle
