Stainless Steel SS316L Diaphragm Valves
Specification:
Sizes available from 3/4" to 2" (3/4", 1", 1 1/2", 2"")
DN20-DN80 (DN20, DN25, DN40, DN50)
Connection ends: Welded or clamped
Valve body: AISI 316L.
Valve seat: EPDM+PTFE or Silicon
Max. working pressure: 145psi (10bar)
Applications:
Diaphragm valves, manually or pneumatically operated, are specifically designed for use on hygiene and aseptic processes in the pharmaceutical industries.
The valve is excellent for flow control as well as open/close control.
The diaphragm valves are better in feature of flow in comparison with other valves. It is eaiser to clean up and better to process the substance with particles. The phenomenon of air pocket is rare during application of flow control.
Casting body is made by the mould paraffin wax model, paraffin wax model infiltratiion in ceramic, to let the whole body wax mold surface form a layer of strong ceramic. Melt wax modl, then into the melting of the stainless steel solution, after cooling knock off the appearance of ceramic, blank body is made up. Casting size is very accurate, the outward apperance is smmoth, clean and tidy.
Various configuration of Diaphragm valve
Pneumatic Operation
1. Didaphragm valve with Positioner/Process Controller(IL-TOP)
2. Diaphragm valve with Control Unit(C-Top)
3. Valve position Regulator
4. Position Sensor Module
5. Stainless steel actuator
6. Plastic Actuator Electric Operation
Manual Operation
8. Plastic Handle
9. Stainless steel handle
