Product Description

Butterfly Valve Pull Trigger Handle, we use sink bolts.

Specification:

Sizes available: 1/2" to 12" (1/2", 3/4", 1”, 1 1/2", 2", 2 1/2", 3", 4", 5", 6", 8", 10", 12")

DN15 - DN300 (DN15, DN20, DN25, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300)

Material: Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.

Max. working pressure: 145psi (10bar) for DN25/1"-DN100/4"; 116psi (8bar) for DN125/5"-DN150/6"; 73psi (5bar) for DN200/8"-DN300/12".

Temperature range: 14 ~ 248°F (-10 ~ 120°C) with EPDM seat, -58 ~ 356°F (-50 ~ +180°C) with VMQ (Silicone) seat.

Operation: SS Lever Handle as the product photo shows

End connections: tri-clamp / tri-clamp.

Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm), Ra 32µin is the default.

 

Options:

• Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.

• The seat and gasket can be EPDM, VMQ (Silicone) or Viton 

• End connection can be butt-welded, sanitary tri-clamp, threaded, flanged, I-line or others upon request.

• Handles: 3-4-position pull handle; multi-position handle with glass fiber cover or in pure stainless steel.

•              

Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.

• NC operated: normally closed (fail closed)---air to open, spring to close

• NO operated: normally open (fail open)---air to close, spring to open

• AA operated: double acting---air to open, air to close

• Valve intelligent control: position sensor, C-top controller, C-top controller (AS-I)

Product Image